Siraya TechFast ABS-Like 3D Printer Resin 405nm UV-Curing Non-Brittle High Precision 3D Printing Liquid Standard Photopolymer Resin for LCD DLP 3D Printing(Grey, 1kg)

After trying a few other resins I honestly can never go back. Sirya tech fast has half the oudur which is great for a not fully sealed printing room. The quality and strength is unmatched with even thin bits of models being strong but not too brittle. And faliure rate by far the best feature for me is very low compared to other resins. Its not quite as fast as advertised but it still lets you reduce exposure about 40% on average. The cost is also only slightly higher then the competition.Easy to work withGreat quality printsLow smellLow faliure rateFast printsI wont be buying a diffrent resin for mini printing unless somthing new and incredible is realesed.

Same print settings consistently fail with other resins - and of all the "ABS-like" resins, this is the one that comes closest to filling that promise. It's far less brittle than just about all its competition. It also cleans very well in IPA. Odour is there - but lower than most of the others.So - by far the easiest to print with, best quality results on successful prints, low odour, and only costs 30% more than other resins - which makes it definitely better value when you offset that premium against failed prints from other resins.[EDIT] pigment version makes a really big difference - white is a bit problematic as it suffers a lot of bleed though on the support side - seemingly due to low pigment levels. It's possible this is be due to pigment settling out, but I always shake the bottle a lot before use, so when using White I end up adding extra pigmentNavy blue on the other hand is very heavily pigmented - and the pigment definitely does settle out, although is easy enough to stir back in. The extra pigment means that all details are beautifully crisp, even on the support side - it also means the cure times need to be at least 50% higher

Head and shoulders above Elegoo resins on my ageing Mars. Little smell, no print failures, less damage when removing supports, cures much faster. This stuff is amazing.

This is my go to 3D printer resin. Good quality and a pleasure to use.

very happy works well made very smooth prints

Bought for my son, who is only using this in his 3D printer now. He’s very pleased with the results and has recommended this to his friends

Used elegoo resin for a while and didnt think I could do much better.After dialing the exposure i have been constantly surprised by both their white and Navy Grey. The white can be a little translucent, but it prints fast and sharp. Navy grey is probably the single best resin i have used. Yes the pigment will fall out of suspension, but the resin holds detail, doesn't warp and sands amazingly well. Just take some time to stir the vat and it will be good to go.The small extra in cost for this brand is worth every penny.

This resing gives great results i have used the gray and switched to navy gray as it shows the hilights and shadows better when selling items. Can not fault this at all. Every time I think I will use a cheaper brand I regret it instantly. Great results on mono x 6k at 2sec per layer. There is a mild smell but it is no where near as bad as the cheaper resins. Its tough once cured and if you printing minis I would recommend getting the tenacious and mixing in 100ml or 10% into the fast to get a bit more elasticity part so if the mini is dropped little parts won't shatter. The only down side is cant find the 10l bottles in the UK

This is my go to. Doesn’t have a strong smell, easy to work with and the prints come out solid. Prints extremely well. Very happy with this resin. I’ve used mech white and grey. Best preforming resin I’ve used so far. I wish they would sell it by the gallon!

Llegó a tiempo y bien empaquetado. Compré varias y cada resina venía bien protegida en cajas individuales y con soportes extra.Los envases venían muy inflados por los gases, pero la resina está perfecta, solo hay q tener algo de cuidado al abrirla.Respecto al peso, me daba la impresión de que no iba a pesar los 2k, así q lo verifique con báscula, para mi sorpresa, pesaba lo correcto.La resina perfecta, lo esperado de Siraya tech, es un producto original

Très bonne résine résulta encore mieux que hé ke penser. Je recommande

Ho recentemente avuto l'opportunità di utilizzare la resina di Siraya Tech per la mia stampante 3D, e devo dire che sono rimasto estremamente soddisfatto dei risultati! La qualità delle stampe è eccellente, con dettagli nitidi e superfici lisce che rendono ogni progetto straordinariamente realistico. La resina si comporta in modo impeccabile durante il processo di stampa, con pochissime deformazioni e una facilità di utilizzo che la rende perfetta sia per i principianti che per gli esperti.Un altro aspetto che mi ha colpito positivamente è la robustezza e la resistenza delle stampe finali, che mantengono la loro integrità anche dopo test di stress e utilizzo prolungato. Inoltre, il rapporto qualità-prezzo è davvero imbattibile rispetto ad altre resine sul mercato.Non vedo l'ora di provare anche le altre versioni di resina offerte da Siraya Tech! Sono curioso di sperimentare le diverse formulazioni, come le resine ad alta resistenza, flessibili o adatte per l'uso ingegneristico. Se queste sono all'altezza del prodotto che ho già provato, sono sicuro che diventeranno i miei materiali di riferimento per ogni tipo di progetto.Consiglio vivamente la resina di Siraya Tech a chiunque sia alla ricerca di qualità, affidabilità e convenienza per le proprie stampe 3D!

Me ha sorprendido mucho para bien.En primer lugar, las dos resinas Siraya fast que he probado, huelen mucho menos que otras que he tenido.En cuanto a resistencia/tenacidad, no he hecho pruebas, pero en mi caso no es lo que busco.El acabado de la pieza, mate, en ese gris marino, y el nivel de detalle y resolución, son espectaculares.La figura está impresa con una Elegoo Mars 3 pro (4k) y estoy muy satisfecho con el resultado. Recomiendo 100%.