ERYONEUltra Silk Gold, Silver, Copper,Bronze, Dark Gold PLA 3D Printer Filament 1.75mm, Dimensional Accuracy +/- 0.05 mm, 1kg (2.2LBS) / Spool Gold EUUSG 1

This is a very silky filament it has a very good shine and reflectiveness that makes for some awesome prints. I am the type of person that likes to paint my models but I also like to leave some of the natural filament showing through. By printing with this filament from Eryone I am able to make some very cool and unique prints that the plain black or gray just can't accomplish. Pros: Easy to use as it is very adaptive to different temperature rangesStays flexible on the roll, doesn't get brittle after it has been sitting for a while.Good for details, I print a lot of 28mm Miniatures and the details shine through with no problem.Not picky about the printer, I have had some other brands of filament in the past that only liked to print well on a certain printer no matter the settings in the slicer. This Eryone filament is always happy to print on any of my 5 different printers.Cons:Sometimes the availability of supply is a issue but that is the only negative thing that I can come up with TBH. I have used Eryone filament for over a year and I keep coming back to this brand as it is consistent and priced competitively with all other brands. I would go as far to say that it is my "go to" filament of choice because of reliability.

Don’t waste your money on the bronze PLA!I wanted some bronze filament to use on a special project. I have used filament from this brand successfully before so when my normal filament didn’t have a bronze option, I figured I’d give this one a try. I should’ve listened to a previous review that said the bronze PLA had virtually no layer adhesion. I’ve never worked with a filament that had such poor layer adhesion. My prints were easily broken apart along the layer lines with minimal effort. No troubleshooting I did had any affect on it and I’m pretty adept at navigating filament issues. Sometimes it just comes down to an inferior product like this clearly is. This product should not even be sold. Total garbage.

This is for ERYONE Copper Ultra Silk PLA. I have creality Ender 3 v2, using Cura for slicer. The layer adhesion was terrible. Everything I printed just broke apart at even slight pressure. In some of my prints the supports seemed to be stronger than the print itself. The only way anything could hold together was if I printed thick blocks and even then it wasn't very strong. I tried a wide variety of settings, temperature from 190-250C (below 190 wouldn't print for me), speed from 15-70mm/s and everything else I could think to fiddle with in Cura. Nothing made a difference. It's a shame because the colour and look was great. It was very shiny at most of the temperatures I tried and has a great copper colour.

When printing this filament, I had to print it near the bottom of the recommended range. Any higher, and the filament would expand significantly once it left the nozzle.I found that proper cooling is very important with this filament if you are printing anything with overhangs. This filament is a little challenging to dial in but once it is, the prints come out beautiful.

Hello. Art here. I only give honest evaluations and I bought this filament with my own money. Some things I do not review. I would rather say nothing than tarnish my reputation.I bought this filament because the price from Amazon was practically identical to the filament I normally buy here in Mexico.The filament measured 1.70 at every point that I measured, being out of claimed spec by -0.02mm, but no printing problems arose from that.I printed from 200°C to 215°C and from 0.15 to 0.28mm with no sacrifice in color, smoothness, shine or sheen.I found adhesion to blue painter's tape without glue was fine with no lifting or curling from 35°C to 60°C and it continued to stick with the heated bed shut off during the print.Layer adhesion, barring a measured test, seemed equal no matter the temp or the layer thickness. I have printed with filament that costs twice the price and I see no value in paying more and not getting any additional benefit.So, while this is but the first filament from Eryone that I have tested, I can say that it is a good filament worth a try for PLA beauty prints.