ANYCUBIC Vyper/Kobra Max/Kobra Plus 3D Printer Hotend Replacement Volcano V5 J-Head Quality Brass Nozzle 24V40W Ceramic Heating Cartridge Element Supports High Speed Printing

Was getting a print head error every time I tried printing. Installed this replacement and it now works perfectly. Perfect print quality and an easy fix.

The media could not be loaded. I needed a replacement hotend, this was affordable, fast delivery and an easy fit. I also got the covers, very satisfied and printing well.

Thin sharp metal shavings were left between each of the fins in the heatsink, i had to get tweazers in there to extract them, other wise a good product that came with a bowden tube that is actually long enough for once and the tolerances on the part itself were correct allowing me to upgrade the heatbreak.

The media could not be loaded. I needed a new hotend for my Chiron and I am so glad I went for this one. It comes with everything you need and can be fitted in less than 10 minutes. The Ptfe tube is plenty long enough although I have kept it back due to having a capricorn tube. All I had to do was a quick bed level just in case there was any difference in height and then I set it off on this 9 hour print. This is a very good alternative and for the price it's even better. It was all nice and tight when it arrived and the leads were the perfect length to connect straight to the circuit board within the hot end shroud. If you are asking should you trust this hotend, then please look at my video for the quality this gives.

The media could not be loaded. I am deviated, I have replaced my hotend many times before but after replacing it with this product my 3d printer started to steam up rapidly, the faulty hotend caused the side of the printhead to melt and now my 3d printer is unusable, I have contacted the manufacturers about this issue to rule out the possibility of anything else that could have caused this issue and the manufacturers said it was the result of the faulty hotend that I purchased, this was a terrifying experience to have to go through, I have now lost my 3d printer which I spent so much money on, I am just glad that I was there to ensure that the new hotend was running properly as I managed to notice the smoke in time and was able to turn it off in time. If you care about your safety then do not buy this

Bought this as mine had given up, arrived quickly, fitted in around 10-15 mins, minimal bed leveling, i would say this is the first head that has given me the best prints to date the layers are spot on and with a bit of tweaking with the temp no stringing. excellent results, if the results are not good with this head then its probably poor filament as i found out through trial and error. Great Value.

Very good quality, fast delivery

Nozzle/ Tip was over tight and snapped 1st change Good quality just costly keep replacing as this is the 2nd one I’ve had to replace(The other 1 being from another company and was really loose and leaked ruining all my prints)