iSANMATE 3D Printer Filament, Tri-Color PLA Filament 1.75mm Bundle, Color Changing PLA Rainbow Filament, Coextrusion Silk PLA +/- 0.03 mm, 250g x 4 Spool

Make sure you dehydrate your filament.This stuff prints easy if you dry the filament, though I did have some breaks. That said, it is quite brittle compared to normal pla, but the finished product is beautiful. For best effect, use a LED light on it for a bit to "charge" it up, then turn off the lights and it will shine bright

The color was great through and through. Nice and bright. They fit well on my AMS lite which I'm learning that most spools this size do not. No tangles, which is definitely a bonus

I had heard that PETG is somewhat difficult to print so I had to try it out. Adding carbon fiber to the mix sounded just like the challenge I was wanting. To my surprise, this filament printed beautifully on my Neptune 3 Pro with minimal changes to the generic PETG built into Cura. It's perfect for functional parts (I printed fixing brackets for the MGN12 rail I used to update my laser's x-axis) and the visual quality is much better than most PLA I've used. There is an oozing and stringing issue but after tweaking the slicer settings (temp, retraction, travel), it greatly reduced that problem. The color combo was also a selling point since there is variety without having to shell out $30 each for 1kg of each color. I didn't receive a spool of the brown but I did receive 2 rolls of blue (I contacted the seller but no response but it's a minor issue). Overall I am quite pleased with this filament and going forward I think that I will move away from PLA in favor of PETG--it just prints beautifully.

With my very first 3D printer, I could only print with ABS. At that time, I frequently printed in a Glow ABS. Kids just seem to be really intrigued by Glow-in-the-Dark items and it was a big seller back then. I have looked for PLA in a glow for quite some time and the only items I found were way to over priced for my tastes. Then I stumbled across ISANMATE's Glow in the Dark Filament and decided to give it a go. When the box arrived and I opened it, I saw the same quality packaging that I always see in ISANMATE's filaments, solid box with a nicely vacuum packaged roll of filament. Removing it from the package only took a few minutes and it was set to print. I really appreciate the quality of the spooling of the filament. Nice even rows of filament shows that ISANMATE takes the time to get it right the first time. I normally do a test print, without running a Temp Tower, just to see hoe the filament prints with "Standard Settings" The Benchy printed beautifully on my MK3s. Once the print was done, I let the print sit in the bed and cool and soak in the light. Then I turned off the lights to see how well the glow would show. Some filament I have tried in the past, had a very low glow and it was difficult to take photos without adding some additional light. Not so for this filament, these photos are straight from my phone. There is a little bit of stringing visible but a few extra degrees of heat will fix that and then these will be perfect. The last image is what 3D printing is all about. Our old Christmas tree star died and we had to buy a new one. The star came with a terrible mount that looked like it was made from the top of a milk carton. as tall as our tree id, the star would never fit on top with that stupid mount. I took the mount from the old star and testid it. The "Chip Clip" design is great and allows the star to be mounted lower on the tree and that way it clears the ceiling. The mount had a green tube on top that fit the old star but didn't fit the new one, it was bigger. After 15 minutes of time in the modeling software and 30 minutes of print time and the new star was on the tree. The glow filament isn't as white/white as the star but buried in the tree, you'll never notice.All in all, I have come to like ISANMATE's filament and the price is very hard to beat. If you need to GLOW, give this filament a try!!

This filament I ended up keeping the glows great it is not red it is orange still looks good will work with a flashlight and UV light is of course the best

The dual extrusion is so uneven and inconsistent that the prints look terrible.The unevenness (where it's more of one color than the other) causes the print to not have a side that is clearly one color. For other brands of dual extrusion filament, when you spin the print around, you can clearly see, for example, one side is red and the other is blue, and there's a transition between the colors for positions in between. For this one, one side was clearly gold and the other was silver and gold.The inconsistency (where it's not the same ratio throughout) causes the color changes to vary even from a single point of view. So looking at a single side, some layers are gold and some are silver, but it's basically random which layers are which color. This has the effect of the looking like the colors bleeding into each other without a smooth transition.The two poor effects together simply made the print look like it was originally one color and I accidentally spilled something on one side, staining it the other color.Because of these reasons, I only use the remaining filament for prototyping or parts that are not usually visible. Even this was hampered by poor winding. The filament seems to have been wound poorly causing the filament to tangle, which then prevented my printer from extruding the filament. This lead to prints that stopped putting out filament, but since the filament was still in the runout sensor (though not moving), the printer never stopped. This ruined a number of prints until I had to just rewind the filament myself onto a new spool.As a filament, it was fine, but for filament that's relegated to prototypes and hidden parts, I definitely overpaid.

The media could not be loaded. El filamento creo que es de muy buena calidad, no tuvo ningún problema al imprimir, su.color cumple con las imágenes que se están mostrando.Creo que por el precio es un buen filamento

The quality of the PLA itself if horrendous, it's not multicolor it's just translucid white and it barely glows in the dark.

Awful product. Does not glow in the dark what so ever. Totally miss sold this item and very let down. Avoid at all costs

Produit impeccable et parfait pour l'impression

this is just amazing it prints so cleanly without any problem at all prob 1 of the best i have used and the gradient is lovely too