Dash Cam Hardwire Kit, Car Dash Camera Type C Charger Hard Wire Kit for Dashcam DC 12-24V to 5V/3A Low Voltage Protection 24h Parking Surveillance with Fuse Tap for Car Dashcam, GPS, Radar (Type C)

Simply it worked perfectly with my dash cam

Did what I neede it to do

Perfect for install a dash cam, instructions very clear, enough cable length to install from anywhere

I have a pretty good understanding of electronics and I tested this power supply on a bench with 12v variable input before I installed it in my vehicle. When 12 V is removed from the ACC input, it draws about 250 mA, and the camera mirror automatically goes into the park interval record mode. The voltage had to drop to around 11.2 V for the power supply to cut power to the mirror, and the current dropped to basically 0 mA to protect the car battery. That is lower than the 11.8 V it advertises for cutting off power draw, and the risk is being able to start the vehicle at the lower voltage. For this, I give it four stars. I think this is OK for normal daily driving. But I will install a switch on the battery feed to the power supply to manually turn it off if I will park long-term. Overall the power supply works as needed, puts the mirror into the park interval recording mode, and will draw 0 mA if the battery gets too low.

I have drained my battery probably 5 times on my new truck. I made sure that the ACC power line was plugged into a switch that only turns on when I turn the key on. hell, I have my radar detector that is spliced into it as well. But the automatic battery shut off? What a joke. Seems Im not the only one here with that problem either. Looks like I need to find one that actually works. What a piece of junk.

This was a better option for my camera than the one the camera company recommended because it actually had 4 different fuse type jumpers where the recommended one only came with 1 and no options for the different fuse types! The fuse jumpers made hookup real easy and seems to be well made.

The product works fine. Just a warning- bought this for a 2025 Subaru. The low profile mini fuse taps didn’t fit correctly. Had other low profile fuse taps, used those and worked. I didn’t contact the seller.

Contained all the parts required to properly test for fuse box power, adaptors to accommodate fuse types and run cable to headliner. Cables are definitely long enough for any install and appear to be of a high enough gauge to handle current draw.