Dash Cam Mount, Universal Dash Camera Rear View Mirror Mount Holder Kit for Miden S7, YI, Rexing V1P, APEMAN, Anker Roav, Falcon F170, Z-Edge, Old Shark, KDLINKS X1, E-ACE, Peztio and Most Other

This is exactly what I was looking for! I bought a dashcam about a year ago, but unfortunately, the original suction cups became unusable due to high temperatures. I was disappointed, thinking I’d need to buy a new dashcam, but then I found this reasonably priced product, and it was a lifesaver. I highly recommend it to everyone—it’s easy to install and of great quality.

This is an excellent quality dash cam. Easy to install and videos can be easily accessed on your mobile phone. I bought another one for my wife’s car. Highly recommended!

BE AWARE!!! Bought for a 2012 GMC truck with On-Star on the rear view mirror and an Aukey DR01 cam. The kit had a good selection of adaptors for the cam. The issue I ran in to was the clamp being so short that when I attached it to the mirror the length of the clamp and cam connector would only allow the camera to be pointed up in the air. (Great for taking a video of birds or clouds). Per the picture, I had to purchase 1/8" rubber and fabricate shims to place on the bottom of the clamp to drop the cam down for the clearance needed to point the cam correctly. By the pic, you can see I added 1 1/2" to the drop to allow for the cam power cord to connect, clear the ON-Star, and to aim at the road properly. (Good thing the kit came with two longer screws to allow this!) If you have On-Star on your rear view mirror; plan on having this issue. I also had to go to my local hardware store and buy wing nuts (4 mm) because the ones that came in the kit were stripped. Knowing what I know now, I would still have bought this kit and modified like I did. The manufacturer needs to make consumers aware that an On-Star mirror can/will be a problem OR just make the clamp 1 1/2" longer to allow for clearance.

Good quality and perfect fit

I like the idea that it isn’t a suction cup. i don’t like how it hangs the dashcam a bit lower than what I wanted.. but I’ll have to get use to it. Out of all the pieces provided, 1 piece somewhat fits the z Edge wifi dashcam. It fits as in, it is small enough to slide into the slot of the dashcam to hold the dashcam. BUT! because it doesn’t exactly fit the slot snuggly, the camera is CONSTANTLY shaking so you won’t be able to see your video clearly AT ALL. I’m not joking when I say that the video is extremely shaky. Go and look at other peoples video on here with the same exact issue and you’ll see what I mean. hmm I’ll have to try to make it work somehow? Maybe tape it down?? Ugh what a hassle it will be to have to rip the tape off and on just to keep the dashcam from constantly shaking. Is there a piece out there that can fit perfectly?! if anyone out there knows one that actually fit the z edge perfectly please let me know!UPDATE: so I thought the problem was only because the piece is too small to fit snuggly. After taping the dashcam tightly to the piece that holds the dashcam, I realized that was not the only reason why the videos are EXTREMELY shaky! It is ALSO because of the entire thing..it’s not sturdy enough to just hold the camera in place or something!! As much as I’ve tightened it, it keeps shaking!!!! ugh this thing sucks!!! I’ll figure out another way and if it doesn’t work then I’m returning. So so so frustrating.

Some dashcams have the placement of where the USB goes into it above the camera itself, unfortunately mine is one of those. This makes it tricker to set properly, looked for alternatives and the best I could think of was getting longer screws. My Tacoma also has a girthy mirror shaft so that also took space away from the screws they had sent. I got 3" screws at the hardware store and they worked but I can't adjust the mirror anymore. I wish they placed these 3" screws themselves and give me less of the joints that are essentially trash to me.

Excellent product.

Either use the original adapter from the suction cup mount for the camera along with the smaller "U" shaped adapter from this kit, or there are 2 other adapters which are compatible with the mounting hole of the camera. I chose to use the "U" shaped adapter to give me a little bit more flexibility and precision for the angle at which I wanted the camera to be set at - it gives just a little bit more reach so I can position the camera closer to the windshield. I also used the rubber strap provided to help the clamp grip better on the rearview mirror assembly. Once every thing is tightened down it is very solid - I have no concerns about it loosening or shifting.This universal kit seems to have enough adapters to cover a very wide range of cameras and setups. Except for the screws and wing nuts everything else is made of some kind of composite plastic - it seems durable and should endure the hot summer and cold winter temperatures. There is a bit of concern about mounting an additional item onto the rearview mirror assembly, like it might over load the OEM mount... but we won't know until something happens to it.Based on my needs for compatibility with the COOAU D30S 4K Dash Cam I can highly recommend this kit. Your mileage may vary for other cameras but there are enough adapters that you could rig something together. Give this a try... you can always return it if it doesn't fit.