PCIE Riser for Ethereum Mining Rigs, GPU Risers for ETH Mining Rigs, PCIE Extension Cable, GPU Extension Cable, PCIE X1 to PCIE X16 Riser, VER006C GPU Riser, VER006C PCIE Riser (Blue-6PCS)

Perfect for what I needed

Pulled out computer parts and moved them to an open air case due to heat. I found the cables would not reach the GPU. Ordered these to get my GPU back into the fray for my system. IT was down for two days, but was able to very quickly get unit up and running. It's been running for two days with no issue. I will update if problems occur, but as of right now I am happy with this selection.

Miner review:So first off. these are great risers. That being said, BE FLIPPIN smart about how you power them. The included Sata to Molex cable that comes with the riser, throw them away. Read ANY article or youtube about the matter and those cables are death traps for your poor GPU and wont work with the riser (maybe you'll get lucky, but since your dropping some serious coin on your GPU's, don't go cheap on the PSU). The riser has a 6pin GPU female connector, simply use a 6 pin male to 6 pin male power connector to your PSU and your golden. If you have limited 6 Pin connection on your PSUs, look on amazon for Y-Splitters.Otherwise, the cards are great. I have them connected to a PCIe_x1 card multiplier and work wonderfully.

I installed these on some RX 570's and i was getting an avg of 26.5mh/s but with these on the exact same system and same settings i only get an avg of 24.9mh/s.I like them because they use PCI power and with my breakout board it has thicker cables than my old PSU so no more burnt out wires from MOLEX plugs. Ill try to do my overclocking when i have some time to see if i can get them higher but still stable but that shouldn't be necessary it should have the same speeds when the same clocks are applied.

I picked these after researching a bunch of other riser cables. Each set was packaged separately which is really nice since I only needed 2 initially, so the rest are stored in their own bags for future expansion. When I add more GPUs I may end up needing longer USB cables than were supplied as I don't have a typical mining rig setup yet. Overall, installation was easy and everything worked with no issues.

I bought 6 to have spares and using 3 for now. All 6 worked as they should. I am using them for my mining rig. Tip: don’t use the 6pin to sata provided. Power those risers with 6pin to 6 pin to be safe.

Just received this today. Haven't it set it up in my rig yet. But, I am happy to report what I saw in the pictures is exactly what I received. Had a few issues with other sellers products not arriving as described/pictured.I will update if I have any issues.

I did have an issue with one order. I received 5 units instead of the expected 6. The company told me to return it to Amazon for an exchange. In 4 sets, 3 were perfect.