Spurtar Stud Remover Fit 1/4" to 3/4" (6 to 19mm) Bolt Extractor Nut Splitter With Knurled Roller and Cam Lock, Stud Extractor Tool for Broken Bolt Remover or Seized Nuts, Grip Damaged Screws

Esta herramientame funciono muy bien para sacar un tornillo que se daño el exagonal y esta pieza lo saque muy rapido.

Nice tool

Awkward to use like most of these types of devices, this one is worse than most since the retaining ball on the drive extension component has such a weak spring. The part falls apart way too often and way too easily. The component that grips the stud is not hardened well enough with several ridges flattening with each use. When it doesn’t slip it works well enough. I am guessing it will work a few more times before becoming useless

I've spent my entire life fighting with replacing parts on vehicles because the old equipment tends to break off. Well it happened again, I tried to replace an exhaust pipe and sure enough one of the bolts snapped and that was after using wd40 and heat which usually works. I saw this and decided to give it a try. Granted, it still took a bit using an impact wrench, but it did eventually come out. Highly recommend.

I tried to used this stud remover tool to remove 3/8 head studs. This tools design and tolerances allow it under force to wedge itself crooked instead of squarely against the stud. If you do manage to get the stud out, you then need to struggle to get the stud unwedged from the tool itself which is more difficult then the initially task at hand. My tool is cut on an angle, see 2nd picture. I assume this is by design and not a defect.

not a professional tool, but good value for the home mechanic. Wears a bit if used on hardened bolts. Make sure there's enough room to spin the tool around the bolt, at least about 200 to 270 degrees of rotation are needed to use it effectively

Great tool

Works well and is good quality. Great price too.