ANENGDigital Multimeter with Case,DC AC Voltmeter,Ohm Volt Amp Meter,Measures Voltage,Current,Resistance,Continuity,Diodes,Electric Tools for Househould Outlet,Automotive Battery Test

I bought this because I had been given a gift certificate, and had a few dollars left to spend.For what it is, it performs well. I checked it against my Fluke 87V, for comparison. You remove the rubber cover and one screw on the bail to install the two AA batteries. Voltage with a 9v battery showed 8.52 on the Fluke, and 8.54 on the Aneng SZ301. A 20 mv difference is very respectable. A 220 Ohm resistor showed 224 on the Fluke, and 223 for the Aneng. A 500 uF capacitor read 511 uF on the Fluke, while on the SZ301 it was 514 uF. A current test showed similar results. The load simulator test puts approximately a 10 mA load on the battery, which was appropriate and accurate. For what it is, it's fine. My main worry would be how long the selector switch lasts, and the jacks/sockets for durability. I would recommend if you want them to last don't remove them unless you have to. This is a good meter if you're on a trip, and don't want to take your expensive meter with you. It doesn't have autorange, but that's really no big deal at this price point. It's very lightweight, and the probe wires are thin gauge, thinner than Fluke leads. It does the job if you're in a pinch, but for how long? I gave it five stars for its features, which are very helpful. The display was easy to read.

Purchased to check AC capacitor, works perfectly! Nothing negative to say for $10 bucks spent. So happy I went with this multi meter!!! A phenomenal value!

I was looking for an inexpensive multi-meter, and I certainly got that.. It does what it's supposed to do, and seems accurate for the few things I've tested it on, so far..I do like that it has a softer plastic "surround" that offers some protection if it gets knocked around, although ~that~ is the case that is mentioned in the title of the description..I was expecting something a bit different for a case though, tbh...I also like that on the Continuity setting, you get both a beep noise (actually loud enough to hear) AND a red light illuminates.. Very easy to immediately see and hear when you have a good circuit..As others have mentioned, the molded-in probe mounts are a bit distorted, so it takes a moment of work to seat the probes.. They're adequate, but not great...THE one thing I'm really disappointed in (aside from no case) is......there is NO BACKLIGHT for the LCD screen on this unit... That's pretty standard nowadays, or so I thought, but that is kindof an annoyance when you're using this in a not well-lit situation.... And sooner or later, you will...So just a disappointment in this meter, for that.... Had I realized that before my purchase, I would have bought something else..That said, it works, and does a good job, so I will certainly use it... Took one star off for the lack of backlight..

Very easy to use, feels durable the design of it is very sleek, and all and all its great for the price, 5 Stars

good price, works as it should

Good little tester works well

Voltage measurements seem to be accurate, but the physical design is *terrible*.1. You need a tiny Phillips head screwdriver to insert or change the batteries (which do not come preinstalled), and the screw is in a recessed location. Every other device I know allows battery change with your fingers.2. The rubber is bad and does not hold the leads well.3. The instructions are baffling and wrong. Tells you battery compartment is on bottom of device when it’s on top half on the backside.4. No where to store the rubber tips for the leads.

ANENG Digital Multimeter with Case, DC AC Voltmeter, Ohm Volt Amp Meter, Measures Voltage, Current, Resistance, Continuity, Diodes, Electric Tools Battery Test got this one to replace the one I had that went bad. work good.